text.skipToContent text.skipToNavigation

Multicor DW 3 Ultra

Art-Nr.: 94080
  • Dewatering fluid
  • on basis of aliphatic hydrocarbons

 

 

Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
 
Registration / Login

Product Details

Characteristics

Colour / DIN ISO 2049 4.0
Density/15°C / DIN EN ISO 12185 820 kg/m³
Viscosity/20°C / ASTM D 7042 3.7 mm²/s
Flash point (Pensky-Martens) / DIN EN ISO 2719 > 61 °C
Type of protective film slightly oily
Film thickness after dipping 3 µ
Condensation atmosphere (AHT) / DIN EN ISO 6270-2 44 cycles
Salt spray test / DIN EN ISO 9227 28 hour(s)
Corrosion protection indoor storage 18 months
Corrosion protection storage outside 5 - 8 months

Multicor DW 3 Ultra is a dewatering fluid with components penetrating underneath and displacing water and humidity on the surface of the work piece which is to protect. At the same time, the surface of the work piece
is coated with a very thin, coherent protection film.

Multicor DW 3 Ultra is used for drying of wet small and mass-produced parts, to avoid water spots as well as
for the preservation of the surface. The corrosion protection is sufficient for the time of an interim storage and
for a transport under Central European climatic conditions with usual packaging.

The product is applied in as-delivered condition by dipping, spraying or manually e.g. by brush.

placeholder