Multicut Ultra 7
Art-Nr.: 26950- non-water-miscible, low viscous high-performance cutting oil
- based on mineral oils low in aromatics and mist formation
- contains native and synthetic fatty components
- with anti-oil mist additives
- with sulphur and zinc-containing additives
- free of chlorine
- excellent lubricating performance
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / DIN ISO 2049 | lighter 1.0 |
| Density/15°C / DIN EN ISO 12185 | 850 kg/m³ |
| Viscosity/40°C / ASTM D 7042 | 7.4 mm²/s |
| Flash point (Cleveland) / DIN ISO 2592 | > 130 °C |
Due to special high-performance additives Multicut Ultra 7 is especially suitable for deep-hole drilling operations with a diameter < 1mm and bigger 150 D. It can be used for many cutting operations of free
cutting mild steels, case-hardened and tempering steels, high-alloyed rust and acid resistant steels as well
as for non-ferrous heavy metals and light alloys. Working processes, e. g. turning, milling, drilling, broaching
but also thread cutting can be handled without any difficulty. Very good results are achieved especially in
chip removing processes of titanium alloys of any kind. In many cases chlorine containing products can be substituted by Multicut Ultra 7.
The low viscosity guarantees a high rinsing and cooling effect.